Enable Multiple Remote Desktop Sessions on Windows Using RDPWrap (Free Tool)
Step-by-Step Guide to Download RDPWrap from GitHub
Step 1: Open GitHub Repository
Go to your browser and open the following GitHub link: https://github.com/SobieskiCodes/RDPWrap
Click on the Green "Code" Button
Once you're on the repository page, locate the green "Code" button on the right side and click it.
Select "Download ZIP"
From the dropdown menu, click on "Download ZIP" to download the full repository in compressed ZIP format.
Step 2: Turn Off Virus & Threat Protection Before Installing RDPWrap
Open Windows Security
Click on the Start menu and search for “Windows Security”, then open it.
Go to “Virus & Threat Protection”
Step 3: Turn Off Virus & Threat Protection
Click on the “Manage settings” link as shown in the image.
Step 4: Turn Off Real-Time Protection and Dev Drive Protection
After clicking Manage Settings, you'll reach the Virus & threat protection settings screen.
Real-time protection → Off
Dev Drive protection → Off
Cloud-delivered protection → Off
Step 5: Extract the Downloaded RDPWrap ZIP File
Go to the Downloads folder
You’ll find a file named something like RDPWrap-master.zip.
Right-click on the ZIP file
Select “Extract All...”
Click “Extract” to unzip the contents.
Step 6: Open the Extracted Folder
Double-click on the RDPWrap-master folder to open it.
Step 7: Run the Installer as Administrator
Right-click on RDPW_Installer.exe and select “Run as administrator”
Step 8: Allow the Installer
When prompted, click “Yes” to allow the app to make changes to your device.
Step 9: Installation Starts in Command Prompt
The RDPWrap installer runs in a black CMD window. Wait for it to complete setup and show "Terminating service..." at the end.
Step 10: Check Installation Status
The RDPWrap status window will open. Make sure it shows:
Wrapper state: Installed
Service state: Running
Listener state: Listening
[fully supported] in green text
This confirms RDPWrap is working successfully!
Step 11: Verify Multiple Users Logged In
Open Task Manager → Users tab and confirm that two or more users (e.g., ram and sudip) are connected simultaneously via Remote Desktop.
This means RDPWrap is working perfectly!
Congratulations!
You’ve successfully enabled multi-user Remote Desktop access using RDPWrap.Enjoy hassle-free remote access with #InstallerGuru – Installation made easy.